Kverneland geospread

KB6930

Member
Location
Borders
I've been spreading at 24m since I got it what's involved with going to a wider spread for the section control side of it just a case of changing the width same as the spreader?
 

KB6930

Member
Location
Borders
That's what I'm thinking will happen but not 100 percent sure. It's mor like I'd go to 36 for grass so it's not like I'm doubling the size of sections is why I'm wondering
 
What control screen are you using? The spreader will work in 1m increments but it depends what the controlling screen can do, if it’s a Tellus on old software it’s 24...but will always but bigger sections in the centre of the machine...newer software has 36 or 48 sections, or a JD will have well over your width requirement.... the spreader will need to be on software 1.19 or later and if it’s a JD screen make sure it’s not 1.21...it doesn’t connect to JD isobus reliably....
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 79 42.9%
  • Up to 25%

    Votes: 63 34.2%
  • 25-50%

    Votes: 30 16.3%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 6 3.3%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,287
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top