Kverneland i-drill

[Suppin Diesel]

Might be going to look at a Kverneland i-drill pro combination. Anyone run one or any opinions? Thanks

 

[pdagriservices]

Might be going to look at a Kverneland i-drill pro combination. Anyone run one or any opinions? Thanks

There is quite a few I drill pro 3m s on farm machinery locator! Oddly was looking for one earlier.

 

[Gone Shooting]

Have a 4m here - good for cereals etc but not enough disc pressure for beans - doubled the springs but then ram wasnt strong enough to pressure coulters ! Ours has rams for pressure and coulter lift - check linkages are not too worn as ive done a bit of fabricating to tighten ours up - press wheels on it as well but hardly use except for small seeds and dry conditions. User friendly to calibrate and coulters are linked to packer - need 3 spools with ours ( 4 now as using hydraulic top link which makes a hell of a difference on our banks etc ) make sure fans not vibrating as it will self destruct - new bearings in its small gearbox cured ours. Drives harder than our Kuhn / box drill .

 

[Suppin Diesel]

Thanks, would only be using it for small grains on ploughed land so pressure shouldn't be an issue.