Have a 6m 2007 tineseeder and keep getting punctures or tyres off rim on the inside depth wheels .Have tried tubes,tubeless and puncture liquid. Anyone got any solutions, many thanks in anticipation.
Foam might work?
Local tyre depot or forklift supplier will be able to help.
Foam in small pack are available in the motor factors to fill your own, but it might get expensive if you have a few to do.
Might be an idea to do one and try it first ............
I had one do the same run almost off the rim and knackered the tyre. My local tyre company didn't have a replacement ag tyre so they managed to fit a forklift tyre on the rim, was a bit of a squeeze as I think they normally have a split rim. But its 16 ply and hasn't punctured!
I think this is Common problem. Hence Evo ones have gone to bigger wheels and don't fold underneath. There must be a market for some stronger ply one's?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.