Land Rover external roll cage

[John 1594]

Just finished this off today, full external roll cage for a friends challenge cup defender. Made completely by hand with no fancy computer design to go by, just a huge hydraulic pipe bender and a tape measure!

Fits perfectly, now need to make the brackets which will go from the inside of the side panels down through the floor and be welded to the chassis

 

[suffolksmallholder]

Looking good!
Don't forget that little hole the scruitineers like to see>
SS

 

[John 1594]

joke in the shed tonight is should we fit lifting eyes in each corner to allow it to be hoisted out of the many muddle holes its going to find itself stuck in

 

[suffolksmallholder]

 

[roscoe erf]

Just finished this off today, full external roll cage for a friends challenge cup defender. Made completely by hand with no fancy computer design to go by, just a huge hydraulic pipe bender and a tape measure!

Fits perfectly, now need to make the brackets which will go from the inside of the side panels down through the floor and be welded to the chassis

View attachment 5066

looks a proper job lets hope they don't have to test it works

 

[John 1594]

had its first day out today, i didnt get to go as ive been flat out spraying!!

id say she well beached in this pic!!!

 

[llamedos]

Ground anchor and waffle boards needed next

 

[llamedos]

Looking good!
Don't forget that little hole the scruitineers like to see>
SS

and exterior cut off switch, and 4 point harness, and on and on

 

[Penmoel]

Ground anchor and waffle boards needed next

Skids instead of wheels