ACEngineering
Member
- Location
- Oxon
Got to buy a large socket to undo the main pivot bolt on a Strimech shear grab.
Got to be a socket no spanner or stilsons will get near it, I measured the nut as being just over 56mm some thing like 56.3 or 56.4mm? (digital veneers so should be accurate)
Would they have used a imperial bolt???? what size imperial socket is near that?
biggest socket I got is 51mm so no were near!
Need to take the top grab off to do a little repair
Got to be a socket no spanner or stilsons will get near it, I measured the nut as being just over 56mm some thing like 56.3 or 56.4mm? (digital veneers so should be accurate)
Would they have used a imperial bolt???? what size imperial socket is near that?
biggest socket I got is 51mm so no were near!
Need to take the top grab off to do a little repair