- Location
- Kent
The wrap count on our Super Pac wrapper started only counting to two before it froze at that were twisted together were loose in the spade terminal block under the machine were loose in the crimp on connector I fixed that now though it doesn't want to work full stop.
Any help other that dousing it in petrol would be appreciated.
I tested the sensor but I have got voltage across it all the time with and without the magnet over it or nowhere near it but I don't know if it is supposed to be off when the magnet is over it or on but I presume it is likely either the switch or the magnet that's no longer working.
Any help other that dousing it in petrol would be appreciated.
I tested the sensor but I have got voltage across it all the time with and without the magnet over it or nowhere near it but I don't know if it is supposed to be off when the magnet is over it or on but I presume it is likely either the switch or the magnet that's no longer working.
Last edited: