LED my sheep trailer

[Mursal]

Go on Clive ..................

 

[UTV Products]

Yes, I left a voicemail for them as wanted to discuss, but have yet to hear back.

TSS

Finally back to you with sincere apologies for the oversight. I will send links to lights we have for which I believe will be ideal to upgrade your trailer. Just going to check they are all on Farm Marketplace and if not load them on and some will be "keen" prices. Be back shortly to confirm when done. Regards Martin

 

[Hilly]

UTV Products, do you sell them magnetic wireless ones. ?

 

[UTV Products]

Here goes with a bundle suggestion for your Ifor Williams trailer. All plus vat and carriage.
02 x UTV703 Number plate lights
02 x UTV503 amber side marker lights
04 x UTV504 white front corner marker lights (2 x top front, 2 x bottom front)
02 x UTV506 red marker light for top rear corners
02 x UTV411 oblong led tail light set E marked. (includes stop, tail, turn and reflector)
01 x UTV416 red fog light
02 x UTV313 reverse lights (one each side)
01 x UTV714 interior light. (Can offer bigger at bit extra cost if prefer)

Normally £171 + postage and vat the bundle.
SPECIAL BUNDLE for yourself £146 + vat delivered.
As Clive mentioned on this thread - he has used some of same items for past three years and no troubles.
Need to call or message me if require and can place a "bundle deal" on TFF marketplace to allow purchase from there. This deal not available anywhere else.

 

[UTV Products]

UTV Products, do you sell them magnetic wireless ones. ?

Sorry none.

 

[Mursal]

Can @ThatsSomeSheep connect colour to colour from the original wiring on the trailer?
Are your lights following the below colour scheme?

 

[ThatsSomeSheep]

How are you on electrics, are you going to do the conversion yourself?
If so, get the nearest light available to the original and connect one wire at a time.
The most important thing as mentioned above is to keep all connections / junctions watertight.
If you want to have a wee look on E-Bay just for reference, tap in LED taillights, then you can be more up to speed when @UTV Products get in contact with you.
You may well need to fit resistors to keep the indicator warning lights working properly, but their on big deal (make a bit of room in the junction box if needed).

I have a handy neighbour who does most of my trailer repairs etc. Hopefully, with a bit of guidance from here, the pair of us should be up to the job.
Personally I’m hopeless with electrics.

TSS

 

[ThatsSomeSheep]

Here goes with a bundle suggestion for your Ifor Williams trailer. All plus vat and carriage.
02 x UTV703 Number plate lights
02 x UTV503 amber side marker lights
04 x UTV504 white front corner marker lights (2 x top front, 2 x bottom front)
02 x UTV506 red marker light for top rear corners
02 x UTV411 oblong led tail light set E marked. (includes stop, tail, turn and reflector)
01 x UTV416 red fog light
02 x UTV313 reverse lights (one each side)
01 x UTV714 interior light. (Can offer bigger at bit extra cost if prefer)

Normally £171 + postage and vat the bundle.
SPECIAL BUNDLE for yourself £146 + vat delivered.
As Clive mentioned on this thread - he has used some of same items for past three years and no troubles.
Need to call or message me if require and can place a "bundle deal" on TFF marketplace to allow purchase from there. This deal not available anywhere else.

Wow. That’s what I call service on a Saturday night.

I need to speak to my neighbour to discuss the job and will then be back in touch Martin. Thank you.

TSS

 

[Timbo]

Right, silly question time! Does putting a load resistor in the circuit mean that the led lights now become high current lighting the same as a standard bulb?

Almost yes

 

[quavers]

https://uktrailerlights.co.uk/rockfit-standard-system-99-p.asp heavy duty led lighting kit already to fit .

 

[UTV Products]

Wow. That’s what I call service on a Saturday night.

I need to speak to my neighbour to discuss the job and will then be back in touch Martin. Thank you.

TSS

Thanks

 

[Mike6120]

Sorry for going a bit off topic, but I was in a dealers yard last week. He had a couple of new Ifor Williams drop side trailers in stock, that were fitted with LED lights. I'm wondering if Ifor Williams are converting over to LED, or would they have been a special order?

 

[robandles]

Sorry for going a bit off topic, but I was in a dealers yard last week. He had a couple of new Ifor Williams drop side trailers in stock, that were fitted with LED lights. I'm wondering if Ifor Williams are converting over to LED, or would they have been a special order?

If so it's about time they did

 

[Mur Huwcun]

If so it's about time they did

Most have it as a ridiculously inflated price option, after all it’s only the price different (retail) in the lamps that should be as the trailer still needs the cables, juncion box and labour to fit them wherever in the line or production run they are fitted.

 

[Mursal]

How mush extra would they charge?

 

[madmatt]

Sorry for going a bit off topic, but I was in a dealers yard last week. He had a couple of new Ifor Williams drop side trailers in stock, that were fitted with LED lights. I'm wondering if Ifor Williams are converting over to LED, or would they have been a special order?

Was still an optional extra last year when we were pricing up trailers

 

[Mike6120]

Was still an optional extra last year when we were pricing up trailers

I didn't know they offered them as an option...It probably explains the ones I saw....

 

[ThatsSomeSheep]

Thanks

Not had chance to progress this with my repair man neighbour yet, but I will asap.

TSS

 

[Jim75]

Ok @Mursal had the trailer put on my mates pick up and the lights work fine with his older style vehicle. Mine works other non led trailers fine. Something pickup doesn’t like about LEDs?

 

[Mursal]

Nothing on the top ones.

So the top lights worked on your mates pick up and wont work on your pick up?
And the bottom lights work on both pick ups?