Lely 675

[jonny]

Timing seem to be out between 2nd and 3rd reel was wondering how to get back on time

 

[bobk]

Knock the roll pin out at the top of the rotor

 

[jonny]

Knock the roll pin out at the top of the rotor

Could you explain please

 

[Dave W]

Knock the roll pin out. Drop the rotor down so it's no longer in mesh. Push back up in time and out roll pin on.

Just be aware though that tedders don't go out of time for no reason. Most likely a bearing going somewhere

 

[bobk]

Put a picture up , are the rotas hitting

 

[jonny]

Knock the roll pin out. Drop the rotor down so it's no longer in mesh. Push back up in time and out roll pin on.

Just be aware though that tedders don't go out of time for no reason. Most likely a bearing going somewhere

Big lump of grass went through a couple of years ago and when you are in heavy crops the tines are hitting the next reel Is this the roll pin underneath the disc?

 

[bobk]

Big lump of grass went through a couple of years ago and when you are in heavy crops the tines are hitting the next reel Is this the roll pin underneath the disc?

You'll have to strip it down, it's out of timing , at best .

 

[bobk]

 

[jonny]

looks different

 

[bobk]

looks different

Mine is the end rota , middle ones you have to take to pieces

 

[jonny]

Mine is the end rota , middle ones you have to take to pieces

They all have a similar gearbox, there seems to be 6 Allen key studs on top of each gearbox holding the reel up

 

[bobk]

They all have a similar gearbox, there seems to be 6 Allen key studs on top of each gearbox holding the reel up

You can't do the middle rotas without taking the outside rotas off first , start from the end and work in ,