- Location
- mid cornwall
Got a lemkin plough here and could do with identifying what bodies are on it as the landsides are variable and knackered but no idea what body the need to be ordered for
Lemkin plough body
- Thread starter johnboy87
- Start date
We had 3 DL110’s back in the day. Usually the points, wings, land sides, skimmers, and (usually) shins are common across the various bodies with a variety of options that fit them all, as in 14” or 16” wing, standard or maize skimmer boards or standard or large land sides...
...With the exception of yours. That’s not a rectangular land side, so it’s not B20, B25, C40 or W52. Take one off, wire brush the back and you should find a seven digit Lemken part number stamped on it.
...With the exception of yours. That’s not a rectangular land side, so it’s not B20, B25, C40 or W52. Take one off, wire brush the back and you should find a seven digit Lemken part number stamped on it.
Last edited:
- Location
- South Wales UK
Think overum same
Tonym
Member
- Location
- Shropshire
Look like LWS bodies to me.
bravheart
Member
- Location
- scottish borders
bravheart
Member
- Location
- scottish borders
If lws the no. 2 landside on the top is the correct one.
- Location
- mid cornwall
I thought that might be the case, in the mean time I've taken off the back one on the top and come up with 340 1871 WS2M L
- Location
- mid cornwall
That looks promising, had a look on spaldings and they do the medium length one but the rear one is discontinued and pan Anglia seem to list what looks like the rear one