lexion 750 wosr settings

[westwood]

HELP !!!!!
New combine!!
Having great difficulty in achieving a good sample. Seeds seem to be small. What should I change from the claas own settings. Full list would be very helpful.

Thanks in advance

 

[Bob c]

I am no arable man,.....but may be @Clive or @warksfarmer can help

 

[Bob c]

welcome as well

 

[JACK F]

Not on our the machine myself at moment but main differences by memory were concave wider open than they say about 40mm and bottom sieve much tighter shut at about 4mm.

 

[warksfarmer]

HELP !!!!!
New combine!!
Having great difficulty in achieving a good sample. Seeds seem to be small. What should I change from the claas own settings. Full list would be very helpful.

Thanks in advance

Is it really ready?

 

[westwood]

Is it really ready?

Yes it is . Been sprayed off 2 weeks and at 7% mc

 

[Clive]

What's the problem with the sample ? Un trashed pods or chaff etc ?


Concave all the way open, then back 5 in case you block it !

Lowest rotor and drum speed you can run (lower than the class adj settings)

Air higher than Claas settings - you won't blow it over the back

Bomb doors closed

Sieves can only really be set up in the field but generally 4-5 tighter than adj settings

All from memory as we haven't started yet, will post ours (770) on Wednesday when we do start if your still struggling

 

[Sussex Martin]

Yes it is . Been sprayed off 2 weeks and at 7% mc

Is it really ready?

Local farms rape in the barn early last week, fields have had bio solids spread and cultivated, probably 200 acres.

 

[Clive]

Is it really ready?

It's ready here, would cut tomorrow if they were not busy fitting the anti fire kit !

Want osr and barley cleared by weekend, might take a month off then until we have some wheat ready ! still green as grass mostly

 

[stuart]

It's ready here, would cut tomorrow if they were not busy fitting the anti fire kit !

Want osr and barley cleared by weekend, might take a month off then until we have some wheat ready ! still green as grass mostly

What is the anti fire kit a compressor and some pipe or is it top secret

 

[Sandy]

It's ready here, would cut tomorrow if they were not busy fitting the anti fire kit !

Want osr and barley cleared by weekend, might take a month off then until we have some wheat ready ! still green as grass mostly

How is the tower w barley looking?

 

[Bob c]

1. 
   
   
   
   I bet claas don't call it that​

 

[Clive]

What is the anti fire kit a compressor and some pipe or is it top secret

I don't know exactly, will know more tomorrow but it apparently takes x2 fitters a full day to fit it ! Think it's a lot of tinwork and heat wrap basically

 

[Clive]

How is the tower w barley looking?

Promising, a healthy lean on looking heavy ....... So it will probably disappoint !

 

[yellowfrog]

I don't know exactly, will know more tomorrow but it apparently takes x2 fitters a full day to fit it ! Think it's a lot of tinwork and heat wrap basically

takes about a day to fit hd drawbar so you can tow fire engine behind!!!!

 

[westwood]

Thanks for that Clive. Trashy sample and loss monitors going wild over the sieves and returns heavy. Look forward to hearing how you get on.

 

[Clive]

Thanks for that Clive. Trashy sample and loss monitors going wild over the sieves and returns heavy. Look forward to hearing how you get on.

Sounds very like your over thrashing it on the basis it is fit, open it up and slow it down and close those bomb doors if open to reduce load on sieves and sample and output will improve

 

[warksfarmer]

Thanks for that Clive. Trashy sample and loss monitors going wild over the sieves and returns heavy. Look forward to hearing how you get on.

Is there any losses on the ground though? Loss monitor sensitivity might be a bit high?

 

[Oscar]

Never use loss monitors for OSR, just turn sensitivity right down and do as Clive says above.