Loader for 4000

S80RTE

Member
I am looking at getting a loader for my ford 4000, I am pretty sure the brackets from a 4100 or 4600 will fit. We had a 4610 years ago and all the mountings look the same. Would I be correct
 

Boohoo

Member
Location
Newtownabbey
I think the 4100 is different, possibly the back of a 4600 and the front of a 3600.
I know where there is a 4000, a pair of 4600s and a 4610 but it'll be next week before I'm back there to get a look.
 
Bell housing bolt holes are the same from the 3600 up to the 8210, 4100 and smaller have a different front end , so will have to look for 4000 or 4600 or 4610, not to say you could modify one to fit.
Keep an eye out for a Steelfab quick detach loader, that would fit the 3 and 4 cylinder fords by removing six bolts and moving the front grill guard and stand in or out. I had my loader on my 4600 and later in life on my 7610.
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 80 42.3%
  • Up to 25%

    Votes: 66 34.9%
  • 25-50%

    Votes: 30 15.9%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 7 3.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,293
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top