Loader headstock ID

Hello all, can anyone tell me what loader headstock this is? Was sold to me as Euro quick release or similar. Been trying to order pallet forks with little success. Pic of brackets on the bale spike which do fit also below. TIA.
IMG_20211008_195451.jpg
IMG_20211008_195139.jpg
 

john432

Member
Location
Carmarthenshire
What's the diameter of the top tube/ bar That the hooks hang on to? If it's quite hefty, 3to 4" could it be the New Holland Tele handler fittings, the reverse of Manitou?
 
It's a trima loader with trima headstock by the looks (top bar should be about 50mm dia). Should just need trima brackets (i don't know if they have a number or anything).
 

Sparkplug

Member
Not unlike a JCB Compact Tool Carrier - but pin holes look small from this angle so maybe not - Pin Diameter from memory is 40 mm so hole is around 44 maybe?
 

mixed breed

Member
Mixed Farmer
Hello all, can anyone tell me what loader headstock this is? Was sold to me as Euro quick release or similar. Been trying to order pallet forks with little success. Pic of brackets on the bale spike which do fit also below. TIA.
View attachment 990974View attachment 990975
What you have there is most definitely the trima/McConnell headstock. I have same brackets on my bale handler too
 

CHAP Webinar - Innovative tools to overcome the challenges of Regen Ag

  • 365
  • 1
https%3A%2F%2Fcdn.evbuc.com%2Fimages%2F186160299%2F486662465563%2F1%2Foriginal.20211115-160823


Applying principles of regen ag can incur a range of on-farm challenges. Learn how innovative tools & machinery can help with these hurdles.

This event will be held online from 1pm to 2pm on Thursday 2nd December 2021 so please block it out in your diary.

About this event​

Intro
This...
Top