Loader headstock ID

Hello all, can anyone tell me what loader headstock this is? Was sold to me as Euro quick release or similar. Been trying to order pallet forks with little success. Pic of brackets on the bale spike which do fit also below. TIA.
IMG_20211008_195451.jpg
IMG_20211008_195139.jpg
 

john432

Member
Location
Carmarthenshire
What's the diameter of the top tube/ bar That the hooks hang on to? If it's quite hefty, 3to 4" could it be the New Holland Tele handler fittings, the reverse of Manitou?
 

Bullring

Member
Location
Cornwall
Their not quicke or trima brackets and definitely not euro, their not mx or the old facheaux type. Don’t really know, they do look more like handler brackets going by the amount of steel in them.

Take your pick out of these lot

 
It's a trima loader with trima headstock by the looks (top bar should be about 50mm dia). Should just need trima brackets (i don't know if they have a number or anything).
 

Sparkplug

Member
Not unlike a JCB Compact Tool Carrier - but pin holes look small from this angle so maybe not - Pin Diameter from memory is 40 mm so hole is around 44 maybe?
 

mixed breed

Member
Mixed Farmer
Hello all, can anyone tell me what loader headstock this is? Was sold to me as Euro quick release or similar. Been trying to order pallet forks with little success. Pic of brackets on the bale spike which do fit also below. TIA.
View attachment 990974View attachment 990975
What you have there is most definitely the trima/McConnell headstock. I have same brackets on my bale handler too
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 79 42.7%
  • Up to 25%

    Votes: 64 34.6%
  • 25-50%

    Votes: 30 16.2%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 6 3.2%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,287
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top