Loader headstock ID

[Woolless]

Hello all, can anyone tell me what loader headstock this is? Was sold to me as Euro quick release or similar. Been trying to order pallet forks with little success. Pic of brackets on the bale spike which do fit also below. TIA.

 

[john432]

What's the diameter of the top tube/ bar That the hooks hang on to? If it's quite hefty, 3to 4" could it be the New Holland Tele handler fittings, the reverse of Manitou?

 

[Crex]

Quicke No3? Maybe?

 

[Chuckie]

Trima/sms?

 

[mx110]

they look a bit like kramer brackets

 

[Woolless]

Trima/sms?

It's a Trima loader.

 

[Bullring]

Their not quicke or trima brackets and definitely not euro, their not mx or the old facheaux type. Don’t really know, they do look more like handler brackets going by the amount of steel in them.

Take your pick out of these lot

Weld On Telehandler & Loader Brackets For Sale

Browse our new and used farm machinery selection from a wide range of manufacturers, including the increasingly popular range of cultivation machinery from Proforge

www.agri-linc.com

 

[Lakesdigger]

It's a trima loader with trima headstock by the looks (top bar should be about 50mm dia). Should just need trima brackets (i don't know if they have a number or anything).

 

[ACEngineering]

What's the diameter of the top tube/ bar That the hooks hang on to? If it's quite hefty, 3to 4" could it be the New Holland Tele handler fittings, the reverse of Manitou?

Bottom pins are too small for CNH.

 

[Sparkplug]

Not unlike a JCB Compact Tool Carrier - but pin holes look small from this angle so maybe not - Pin Diameter from memory is 40 mm so hole is around 44 maybe?

 

[Lakesdigger]

That's a trima bucket with trima brackets that came on a trima loader. That's what you have or should i say need.

 

[Fendt516profi]

How many attachments have you got on them brackets? One of these https://www.ebay.co.uk/itm/324806606868 and you can pick up euro attachments

 

[M-J-G]

What's the diameter of the top tube/ bar That the hooks hang on to? If it's quite hefty, 3to 4" could it be the New Holland Tele handler fittings, the reverse of Manitou?

Id wondered that too, but looks a bit light for that.

 

[Woolless]

View attachment 991110View attachment 991111That's a trima bucket with trima brackets that came on a trima loader. That's what you have or should i say need.

That looks like it. I'll try the bloke and see what he says.

 

[mixed breed]

Hello all, can anyone tell me what loader headstock this is? Was sold to me as Euro quick release or similar. Been trying to order pallet forks with little success. Pic of brackets on the bale spike which do fit also below. TIA.
View attachment 990974View attachment 990975

What you have there is most definitely the trima/McConnell headstock. I have same brackets on my bale handler too

 

[ACEngineering]

Not unlike a JCB Compact Tool Carrier - but pin holes look small from this angle so maybe not - Pin Diameter from memory is 40 mm so hole is around 44 maybe?

tool carrier is offset lugs too i think so not that? unless theres more than 1 tool carrier?