Loader. Next little project.

Mur Huwcun

Member
Livestock Farmer
Location
North West Wales
Will just T’ing it in to the lift ram circuit do it? As simple as that? What’s the cylinder you have there? Don’t do much road work but well worth having.

Yes just Tee into lift side of the ram, can fit a tap if you want aswell. Have a look at your valve block, some will have a drilling connected to the left most quick coupling (lift) that you can directly connect into. Mailleux were very good with this
 

Deutzdx3

Member
It’s all up and running, had to put a new priority valve in the block as it didn’t have one. Works a treat.
IMG_2302.JPG
IMG_2193.JPG

Have recently been given a trimma self levelling loader so going to look at fitting that to the existing brackets, a winter project I think along with all the others.
 

Thomas5060

Member
Livestock Farmer
It’s all up and running, had to put a new priority valve in the block as it didn’t have one. Works a treat. View attachment 722088View attachment 722090
Have recently been given a trimma self levelling loader so going to look at fitting that to the existing brackets, a winter project I think along with all the others.
Better keep us informed when you start to that (y)
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 79 42.5%
  • Up to 25%

    Votes: 65 34.9%
  • 25-50%

    Votes: 30 16.1%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 6 3.2%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,287
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top