Command pro on my 6130 puts brakes on automatically as i head out the door, a feature i really likeYes and the door catch is low inside but never fallen out reaching to open it. Nice having park on shuttle to
Command pro on my 6130 puts brakes on automatically as i head out the door, a feature i really likeYes and the door catch is low inside but never fallen out reaching to open it. Nice having park on shuttle to
Err........iv done that more than once after using my case but Iv also tried to flick up the gears with the shuttle on my case after driving my Massey for a bit.Hope all your tractors have that too! I used the brake to stop feature on our 6220 before realising it isnt actually a feature on that tractor! Got lucky and wall escaped injury.
Yes the valtra will put it's self in park if you get out with shuttle still engaged. These features are ok till you rely on them and don't even think about it anymore and then they failCommand pro on my 6130 puts brakes on automatically as i head out the door, a feature i really like
I can see the control in there but can't find the third service to allocate to it@Fendt516profi should be in the hydraulic settings on smart touch
Push on the first joystick button and push itView attachment 930079View attachment 930080 can't see the third service
You have to hear the relay activatePush on the first joystick button and push it
Not so likely to get nicked. Not meaning @NickWhat about pink ?
I know you hold that button then tip and crowd but thought bit at top was live and proportional? if you allocated it to the third servicePush on the first joystick button and push it
Know I don't, I got stick for state of my fendt when I had it and this is as bad or worse. Don't think I've got any from when it was new. Here's how the fendt scrubbed up at the dealer'sShow us some more pictures of your Valtra. You know you want to!
Nice hair band!Any body know how to make little lever on top of joystick work live to operate third serviceView attachment 930048
Show us some more pictures of your Valtra. You know you want to!
Nice hair band!
Not mineNice hair band!
3rd service will usually be an electrical solenoid diverter valve on the loader that switches between the crowd/tilt rams and the 3rd service. So it's either on or off (button pressed, or not,)Any body know how to make little lever on top of joystick work live to operate third serviceView attachment 930048