Loftyrule’s TEF20

[Mursal]

A tad extravagant, no?

 

[Loftyrules]

And keep away from that easy start ..................

It’s started fine all day today without it

 

[Loftyrules]

://www.agrilineproducts.com/parts/front-axle-steering.html?_=Ferguson__Ferguson__TEF20

Cheers have had mixed results with these guys

 

[Still Farming]

Cheers have had mixed results with these guys

Only to show tyre sizes .
Others out there .lots in fact.

 

[startinghandle]

british rubber company in Yorkshire

 

[tomlad]

british rubber company in Yorkshire

Very Knowledgeable man

 

[REStracTORATION]

4.00 -4.50X 19
10.28
Chuck that bloody can of easy start away
Fix the heater plug
And use the tractor to get bedded in give it some hard graft

 

[REStracTORATION]

I can get you tyres
Goodyear's
Or bkts
Or budget
Hey I may even have some 2nd hand tyres if you want used
We're in south Cumbria if you want a ride out

 

[Loftyrules]

I can get you tyres
Goodyear's
Or bkts
Or budget
Hey I may even have some 2nd hand tyres if you want used
We're in south Cumbria if you want a ride out

Thanks, am due up that way soon so will give you a shout if that’s ok.

 

[REStracTORATION]

Thanks, am due up that way soon so will give you a shout if that’s ok.

Yes new ones sell quick
But I've a good set of 600-16 and 12.4 11-28
Here I'll put to a side for you
The fronts are Goodyear's 50%
Rears are barum at 70%

 

[SMID]

Yes new ones sell quick
But I've a good set of 600-16 and 12.4 11-28
Here I'll put to a side for you
The fronts are Goodyear's 50%
Rears are barum at 70%

Get in their @ Loftyrule,s it will look right on that make and size .

 

[Loftyrules]

Get in their @ Loftyrule,s it will look right on that make and size .

Deal agreed so thanks very much to @REStracTORATION

 

[REStracTORATION]

Deal agreed so thanks very much to @REStracTORATION

No problem and thank you

 

[SMID]

Bugger! I,m too late for the commission then

 

[REStracTORATION]

Bugger! I,m too late for the commission then

 

[Loftyrules]

Finally got round to putting the footrest plates on tonight (after topping 3 acres with it)
But I can’t fathom them out and am pretty sure I’ve been sent two of the same side

There are two different types of “hook” plates which I’m not sure if they have to be a specific side, I also have a funny shaped piece that I can’t work out where it goes.

Does anyone have a construction guide?

Photo 1 is the side I’ve done, photo 2 shows the different hook plate, photo 3 is the bit I don’t know it’s location and photo 4 is what I think is another right hand side plate.

 

[tomlad]

Number 1 looks right to me
The two plates will be obvious left and right

No idea re. Number 3

 

[Tigger]

No. 3 looks like the bit on a 35 that can prevent disengaging the PTO section of the clutch, it stops the pedal depressing all the way, and is mounted on the front facing vertical side of the left hand side footplate. Does a 20 have this too?

 

[tomlad]

Nope .
Thats y i don't recognise it
Never owned a 35

 

[Loftyrules]

No. 3 looks like the bit on a 35 that can prevent disengaging the PTO section of the clutch, it stops the pedal depressing all the way, and is mounted on the front facing vertical side of the left hand side footplate. Does a 20 have this too?

That would make sense and would also explain that hook bracket 1 is on the wrong side.