lower ink arm tightening mf 35

[Red Dragon]

The lower link arm shaft has come loose on my MF 35, if I take the wheel off and undo the bell housing can I pull it apart far enough to replace the nut in the bell housing or does it mean stripping the whole side just to do the nut up

 

[Thick Farmer]

Swan Vestas.

 

[Mur Huwcun]

You'll need to drain the oil and remove trumpet housing unfortunately as you will have to fit a new gasket on re-assembly. IIRC remove the L/H side one as you can then lift the diff out and do both sides from there. Replace both pins while you're at it.

 

[Red Dragon]

Thanks for that, have 2 new shafts, gaskets and lock nuts, just need to find the time to do it all.