Mag drill recommendations

[tinsheet]

Alfra Rotabest, piccalo
View attachment Piccolo_32_50_Weldon.pdf

 

[the-mad-welder]

This is my first JEI one after four Rotabroach ones, can't fault it.

 

[tomlad]

Mines a jei i rate it

 

[Av Gorritt]

Evolution here also ++

+1

 

[Steve welder]

Is that a low profile drill

 

[HundyMundy]

Anymore pictures of the shed your building? It looks a tidy job

Just sort of finished today ( well enough as get cattle in.)
It’s 26 ft wide and 120ft long slatted shed, 10ft deep tank. The master plan is eventually feed down both sides and split into 6 pens, but just 3 pens this year and feed down one side.

 

[the-mad-welder]

Is that a low profile drill

Yep, had a load of holes to do in situ on site. I'd stupidly missed them on the drawing when they'd have been simple to do in the workshop. I had to do them once the steel was in and the outside of the steel was against the wall so needed to be drilled from inside the web of the beam.


I'd been looking for an excuse to buy one anyway!!!