Manitou 629 warning light

[sheepwise]

Two year old Manitou 629 was serviced by dealer on Tuesday. This morning a red warning light which looks like a circle with a flat top(engine?) with a horizontal dotted line through it and a triangular symbol on the lleft of it has come on. The symbol is second to the right on the bottom of the screen.
Thought I would ask on here before I go and find the manual.TIA.

 

[ACEngineering]

Two year old Manitou 629 was serviced by dealer on Tuesday. This morning a red warning light which looks like a circle with a flat top(engine?) with a horizontal dotted line through it and a triangular symbol on the lleft of it has come on. The symbol is second to the right on the bottom of the screen.
Thought I would ask on here before I go and find the manual.TIA.

any error codes on the LED screen?

 

[sheepwise]

any error codes on the LED screen?

Looked up manual and appears to be engine coolant level warning light. Understand sensor is in the plastic feeder tank and it only needs to be very slightly low for warning to show.Thanks for replying.

 

[ACEngineering]

any error codes on the LED screen?

found a symble a bit that but I think it will appear on the LED screen not one of the warning lights. Its says high soot level so will be to do with the EGR regen.

If your dealer did not reset the hour clock to tell it machine has been serviced then it will fudge up the automatic regen cycles and will cause issues possibly end up in limp mode needing a forced regen via a laptop

 

[ACEngineering]

Looked up manual and appears to be engine coolant level warning light. Understand sensor is in the plastic feeder tank and it only needs to be very slightly low for warning to show.Thanks for replying.

easy fix then. I don't have a manual to hand so was just looking at some engine info on the regen errors I got.

 

[ACEngineering]

if the hoses under the cab are the same as the 627 then the cab heater hoses and tap under there are common to leak, more so the ones in side the heater box, partly due to the stupid crimp hose clips they use instead of proper jublie clips!

 

[Ormond]

Looked up manual and appears to be engine coolant level warning light. Understand sensor is in the plastic feeder tank and it only needs to be very slightly low for warning to show.Thanks for replying.

If it's losing water check hose that runs down the bottom of the radiator on the cab can side of the engine ...that pipe on our 629 rubbed through as it was rubbing on a sharp edge of metal on the frame....

 

[sheepwise]

If it's losing water check hose that runs down the bottom of the radiator on the cab can side of the engine ...that pipe on our 629 rubbed through as it was rubbing on a sharp edge of metal on the frame....

There is actually plenty of coolant in header tank and no signs of any water leaks.As I said it was just serviced (2000hrs) on Tuesday and have spoken with dealer this morning who reckons it will be a faulty sensor.