Manitou 735 fuse box

ACEngineering

Member
Location
Oxon
Just above the accelerator pedal.
One single screw, just a plate.
Most awkward bloody place to stick fuses

its awkward but there are 2 bolts maybe 3 and the fuse box does sort of come out a bit, again awkward but the PCB board is held in with some nuts and fibre washers to the back box, once these nuts are undone you can plug the PCB board and remove it. Agree crap place for it. Had a couple burn out in the past but not for a while.
 

Jonnyk8

New Member
its awkward but there are 2 bolts maybe 3 and the fuse box does sort of come out a bit, again awkward but the PCB board is held in with some nuts and fibre washers to the back box, once these nuts are undone you can plug the PCB board and remove it. Agree crap place for it. Had a couple burn out in the past but not for a while.
Hey, so I'm assuming this is the same for a 635? Electric window has stopped working and I'm hoping it's fuse but I can't seem locate the fuse box. On the previous 634 we had it was behind a metal panel above the accelerator but I see no such panel in my 635?
 

Jonnyk8

New Member
20230314_203611.jpg
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 79 42.0%
  • Up to 25%

    Votes: 66 35.1%
  • 25-50%

    Votes: 30 16.0%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 7 3.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,290
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top