Manitou fault code

[Ormond]

Have a 2015....629 Manitou. Fault code. 5571...Spn
1*07.fmi
Any ideas? Slight lack of power going up hills. Is it the rail pressure area?

Thanks

 

[ACEngineering]

Have a 2015....629 Manitou. Fault code. 5571...Spn
1*07.fmi
Any ideas? Slight lack of power going up hills. Is it the rail pressure area?

Thanks

It's unlikely to have just one code.
And you have to switch between machine ECU codes and engine ECU codes.

 

[Ormond]

Just the one engine code at the minute....

 

[ACEngineering]

Just the one engine code at the minute....

I'll try and find it on my list later.

 

[Ormond]

Thank you.....the was one code on the edu list yesterday but it's clear now......power is definitely down on the engine

 

[ACEngineering]

Have a 2015....629 Manitou. Fault code. 5571...Spn
1*07.fmi
Any ideas? Slight lack of power going up hills. Is it the rail pressure area?

Thanks

Well you were in the right area! Ironic that we all moan about modern electrics etc yet your code is saying its a mechanical fault

 

[ACEngineering]

 

[Ormond]

Thanks for the information....so the problem lies in the pipe from the pressure relief valve?

 

[ACEngineering]

Thanks for the information....so the problem lies in the pipe from the pressure relief valve?

No idea, fault codes are always a bit vague, i guess its saying there's low pressure on the rail, this could be caused by other things rather than the pressure relief valve but the relieve valve is probably a good cheap place to start, just be aware it will or should be holding back very high pressure in the rail possibly upwards of 650bar!

have you pressed the button on dash to cycle through the codes? they only display one code at a time you have to pressure button to view them all one at a time.

If you not dont anything with common rail then probably best to get a guy in that has iMO.

Oh and a bit of useless info the engine is in fact an Iveco rebadged as a perkins

 

[Dominic troake]

Hi got a fault code on a manitou 629 fault code is 5246spn 126*15 and 16 fmi

 

[Elshafia Mohammed]

Hi, WE HAVE MANITOU FORKLIFT MHT10180 TELESCOPIC, Not moving forward or backward, it show in dashboard TCU sensor Faulty. and give code ( APN 98) what is possibility.