JohnDeere8530
Member
I have a '99 MT 728 telehandler. It wont start as it thinks it is in reverse. Shorting the starter out starts it but dont have neutral, only fwd, reverse (where neutral should be on stalk) and reverse again.
I have checked fuses, they are ok, several (i think) relays next to fuses click selecting forward, but not when going to reverse. A likely hint to the problem ? Maybe a relay is burnt and stuck in the reverse position ?
Fiddled with and banged shuttle lever and thats about it !
Is there anything else I should look at ?
ps bloody thing has cured itself now, til the next time its parked in a awkward place or we need it badly
I have checked fuses, they are ok, several (i think) relays next to fuses click selecting forward, but not when going to reverse. A likely hint to the problem ? Maybe a relay is burnt and stuck in the reverse position ?
Fiddled with and banged shuttle lever and thats about it !
Is there anything else I should look at ?
ps bloody thing has cured itself now, til the next time its parked in a awkward place or we need it badly
Last edited: