Massey 3095 dynashift

Richard Smyth

Member
Arable Farmer
need some ideas for a mate. He has the above which works fine until it is stopped and the battery isolator turned off.

On restarting the tractor the dynashift and pto won’t work. The dynashift leds A and C flash alternately with B and D.

All power supplies and earth cables checked and in good condition apparently.
 
How is he stopping it from doing it for it to be fine when he turns it off? I think the lights flashing like that is to do with the oil being to cold however I see you are in Australia and I would assume you are still quite warm at the moment.
 

RmfJ

Member
Location
Pembrokeshire
Thanks fror the reply’s. Not sure how he is getting it to stop doing it. Didn’t get into that the other day.

If it was the ecu lost its parameters what would be needed to reset it
It would need the diagnostic box for that range plugged in and the code that is printed on the fuse box cover on left side of dashboard put into it.
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 79 42.0%
  • Up to 25%

    Votes: 66 35.1%
  • 25-50%

    Votes: 30 16.0%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 7 3.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,291
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top