SuperTwo
Member
- Location
- Leinster, Ireland
I've got a 1993 3635 that I suspect that the pto is slipping. Is there any simple checks that I can do before ripping it apart to see if the discs are wore out?
60 euro each and there's 5 of themTheyr still burnt. Id do them when your in that length unless theyr extortion
That's good to hear I'll pull it out and have a look at the sealsOn our 8220 it was an O ring failed in the pack. The tractor had done 11000 hours and the plates looked like yours so saved the £500 and re fitted the old ones once we’d found the problem. It’s been perfect since.
Oh dear. Ul be on with the breakers nowView attachment 1054416
Clutch pack seals looked ok but I can't say the same about the 540 gear.