Massey 5465 hp

[Cornish]

What hp would a MF 2006 5465 be? Getting a few different answers online. 120hp? 6 cylinder?

 

[Wellytrack]

Bout that aye.

 

[daveydiesel1]

We have 1 thats not remapped and it wouldnt have alot of poke compared to the 4370 which is supposed to be around the same power

 

[kill]

I had one on loan with a loader several years ago when I was running Massey and my 6465 had yet another spell having repairs and I absolutely loved the 5465 but it was a little flat on power but a really nice drive.
Remember having swine flu also at the time and stopping around every 15- 30 minutes for a power nap and having the heater on in hot weather.
If it’s the one at Cheers he will look after you if you buy it as he’s a good guy

 

[Farmer_Joe]

110 according to tractor data

 

[Wellytrack]

That series of Perkins can be a little flat.

 

[Cornish]

Cheers folks.
main jobs would be 4f plough, 4m speed Harrow, 10cu rota spreader.Would it handle these ok?

 

[Wellytrack]

Cheers folks.
main jobs would be 4f plough, 4m speed Harrow, 10cu rota spreader.Would it handle these ok?

Yep.

 

[Farmer_Joe]

I’ve a 6465 whcih I imagine is same engine but rated at 120 bhp I think it goes very well a lot of torque when mowing-up hills etc very good on pto work

 

[kill]

I’ve a 6465 whcih I imagine is same engine but rated at 120 bhp I think it goes very well a lot of torque when mowing-up hills etc very good on pto work

No boost on 5465. Seam to remember 6465 boosts by 10hp in C&D ranges ( 130hp available) as mine always pulled way better in C range than B range ( Dyna 6 gearbox)

 

[Farmer_Joe]

Mines ancient 2007 tier 2 so no boost here

 

[kill]

Mines ancient 2007 tier 2 so no boost here

Mine was a early Dyna 6 on a 55reg with Perkins engine and it definitely had boost

 

[Farmer_Joe]

Mine was a early Dyna 6 on a 55reg with Perkins engine and it definitely had boost

@dee

 

[farmerphilly]

I have a 5465 which doesn't pull as well as the 6475 for all its the same engine. I would think 110 is about right although when I bought the 5465 I am sure I was told 125hp!!!

 

[Farmer_Joe]

As I understand I belive the 6475 is 130 bhp according to tractor data?

 

[farmerphilly]

As I understand I believe the 6475 is 130 bhp according to tractor data?

sounds about right the pump will be setup differently on the 5465

 

[Wellytrack]

Anything that age you should take quoted power as an estimate.

My 6280 is supposed to be doing 125 @ the flywheel when new 20 years ago.

10000 hours on It’s doing 139 @ the shaft.

 

[kill]

Mine was a early Dyna 6 on a 55reg with Perkins engine and it definitely had boost