Massey 6485 front linkage

[davedb]

After a linkage for a 6485 I’ve just brought where’s best place to buy new, is @Guy still doing them?

 

[john432]

A Goppel linkage is a tidy fit, try Jacobsen in Scotland.

 

[Wellytrack]

After a linkage for a 6485 I’ve just brought where’s best place to buy new, is @Guy still doing them?

Did you ring the lads in Wexford?

 

[davedb]

Did you ring the lads in Wexford?

Yea no luck there they seem to be rare SH and any that come in go quick

 

[davedb]

A Goppel linkage is a tidy fit, try Jacobsen in Scotland.

I’ve googled Jacobsen not found much have you a link to them? Cheers

 

[john432]

Front Linkage Suppliers - Jacobsens-GFM

grangeofkinneff.co.uk, Kinneff Montrose

www.jacobsens-gfm.co.uk

Symon Jackobsens is the man, a straight talking Scotsman, good to do business with.

 

[john432]

Yea no luck there they seem to be rare SH and any that come in go quick

Is your tractor the tier 3 with the rounded front tombstone?

 

[Nearly]

@masseybreaker

 

[davedb]

Is your tractor the tier 3 with the rounded front tombstone?

No a teir 2 old shape

 

[davedb]

Anyone else using a goppel linkage had a keen enough price and a pto is available should I ever need it

 

[bigg6480]

Got a Goppel linkage on a 6480 that does the buckraking and been spot on for 5 years and it does not have the kindest operator.

 

[davedb]

Got a Goppel linkage on a 6480 that does the buckraking and been spot on for 5 years and it does not have the kindest operator.

That’s what I wanted to hear as this might get used on the buckrake

 

[bigg6480]

It was easy to fit as I remember other than the bolt for the belle weight under the rad and cleaning the holes out at the front we had to get a bottom tap to clean the rust out.

 

[john432]

I have a Goppel on a 6475,tier 3, tidy fit and rated for 3.8 tonnes,,but it's just bolted on to the front tombstone. Same as the MF fitted linkage. For buckraking wouldn't you want a reinforcing frame underneath ,going back to the rear axle .

 

[bigg6480]

The frame on ares tier 2 6480 goes back to the bell housing.

 

[ih1455xl]

Is it

After a linkage for a 6485 I’ve just brought where’s best place to buy new, is @Guy still doing them?

is it tier 2 I’ve got a used front linkage and front pto if interested

 

[davedb]

Is it

is it tier 2 I’ve got a used front linkage and front pto if interested

Yea teir 2 I’ll pm you