Massey 675

[Marshall1972]

Hi I am new here and need a bit of help with my Massey 675. Can anyone tell me what type of hydraulic fluid I should use for it and where does it fill?. I have found the dipstick in a bizarre location near the bottom of the tractor. Pictures would be great. Thanks in advance, Marshall

 

[daveydiesel1]

Hydralic oil goes in a filler right at front of cab(cant remember which side). Least this is where it was on our 698t. Just normal utto would do

 

[Marshall1972]

Thanks

 

[Henarar]

Only its not hydraulic oil

 

[MF-ANDY]

Its utto or suto oil you need. Fill it at the cap in front of the cab on the rh side. Dip stick on side cover rh side just in front of rear axle unless you have a late model then it is a longer stick extended over the rh rear axle. Although one of its jobs is to power the hydraulics dont use hydraulic oil.

 

[Marshall1972]

Would this do?

 

[pgilliat]

No

 

[MF-ANDY]

Would this do?

No. Go to your nearest agricultural dealer, or a bulk fuel supplier. They will have what you need.

 

[Marshall1972]

I had bought this already so just wondering if it’s ok?

 

[MF-ANDY]

I had bought this already so just wondering if it’s ok?

No it isn't

 

[Mur Huwcun]

Your tractor backend supplies oil for the hydraulics, transmission, differential and brakes. Tractors have wet oil immersed brakes that need SUTO (super universal tractor oil) or UTTO oil (universal tractor transmission oil) as these oils have additives for the wet brakes plus other drive or clutch plates found in things like the PTO pack, differential lock and splitters or powershifts and on later tractor the power shuttle etc. Hydraulic 32 and 46 are only to be used in things like diggers and hedgecutters.