Hello,
I am facing a little problem with my MF 130 hydraulics.
Normally, in standard tractors, you can set the position of the arms, for example, in the middle of their height without accelerating the tractor.
In my MF 130 I noticed that when moving the lever of the arms and setting the position in the middle I need to press gas pedal. For example, I am having a lawnmower in the back, I am driving on road, I do not want to lift it to the highest position, so I need to 'match' the RPMs to the height. Is it normal in MF 130? If I press gas pedal to the maximum, the lifter goes to the maximum of height, while having arms in the highest position, releasing gas pedal, arms go down.
Another example : The acceleration is on full capacity, I am setting the lever in the middle position, the arms goes in the middle but while releasing the pedal and tractor is idle, the arms go down.
I have disassembled top cover, I found the oil is yellow so it is going to be changed. I also noticed some grooves in the cylinder.
I am wondering if it is possible to apply remote distributor.
Can somebody help?
I am facing a little problem with my MF 130 hydraulics.
Normally, in standard tractors, you can set the position of the arms, for example, in the middle of their height without accelerating the tractor.
In my MF 130 I noticed that when moving the lever of the arms and setting the position in the middle I need to press gas pedal. For example, I am having a lawnmower in the back, I am driving on road, I do not want to lift it to the highest position, so I need to 'match' the RPMs to the height. Is it normal in MF 130? If I press gas pedal to the maximum, the lifter goes to the maximum of height, while having arms in the highest position, releasing gas pedal, arms go down.
Another example : The acceleration is on full capacity, I am setting the lever in the middle position, the arms goes in the middle but while releasing the pedal and tractor is idle, the arms go down.
I have disassembled top cover, I found the oil is yellow so it is going to be changed. I also noticed some grooves in the cylinder.
I am wondering if it is possible to apply remote distributor.
Can somebody help?