Massey Ferguson 3095 dynashift - hydraulics

[its.... only me]

Just fitted a new hydraulic pump on our 3095, but now when we lower the rear linkage we can hear the hydraulic pump - pumping, where we couldn’t previously. Any suggestions as to what might be causing this would be greatly appreciated
TIA
IOM

 

[masseybreaker]

the pump pumps all the time so does everything work as it should ?

 

[its.... only me]

the pump pumps all the time so does everything work as it should ?

You can’t hear the pump “straining” when you you raise the linkage - only when you lower it.
We have lost high box also, it moves on the dash - but not in the box. We think we’ve traced this to a faulty/ sticking solenoid valve. God only knows why these issues have raised their heads because we’ve fitted a new pump ?

 

[masseybreaker]

the high low might be that you have bunged the two holes on the side plate with silicone when you fitted it back on bottom righthand corner that feed oil into the main casting . all that i can think is bits from the old pump have got in the lift valve and its sticking

 

[its.... only me]

Many thanks, we’ll check this out. ?