SuperTwo
Member
- Location
- Leinster, Ireland
I've just bought a 1993 Dynashift 3635 as a project, I've a couple of electrical gremlins that I'm working my way through.
My first problem is that the 4wd is permanently stuck on. The light doesn't light on the dash at all. I've no power to the switch either. I've ran power directly
to the solenoid and it will disengage so I know its not a mechanical problem. All fuses are good and I've checked the wires going to the Autotronic box for corrosion, all wires looked ok
but I'm going to test with a multi meter. Is there anything else I can check or is it most likely a problem with the Autotronic box?
Also what do these switches do? The one circled in orange has been disconnected.
Thanks in advance.
My first problem is that the 4wd is permanently stuck on. The light doesn't light on the dash at all. I've no power to the switch either. I've ran power directly
to the solenoid and it will disengage so I know its not a mechanical problem. All fuses are good and I've checked the wires going to the Autotronic box for corrosion, all wires looked ok
but I'm going to test with a multi meter. Is there anything else I can check or is it most likely a problem with the Autotronic box?
Also what do these switches do? The one circled in orange has been disconnected.
Thanks in advance.