InAnother leak cured only about half a dozen to go.
View attachment 979022
View attachment 979023
Another question for the experts do you screw these thumbscrews in for double acting or screw them out?
View attachment 979024
InAnother leak cured only about half a dozen to go.
View attachment 979022
View attachment 979023
Another question for the experts do you screw these thumbscrews in for double acting or screw them out?
View attachment 979024
Is there a handbrake adjustment port on left hand side - use that on a 62 for free flow return hereWhilst we’re on about the spools, what’s the correct back end oil for these?
also where is the best place to plumb in a free flow return, preferably 2
Spent many hours on one of these, great tractor in their day!!These are the only photos I have at the moment this is the good side, the other door is quite rusty.
View attachment 977140
View attachment 977139
A good quality 10w/30 grade SUTTO.Whilst we’re on about the spools, what’s the correct back end oil for these?
also where is the best place to plumb in a free flow return, preferably 2
Would you be able to take a photo of your backend dipstick? Mine doesn't seem to sit quite right.View attachment 979360
hows this
I did have that thought myself, and one of them is a bit stiff, but after playing about with the lever and having all 3 spools connected up last night I don’t think it’s thatopen center is one of the spoolcables stiff and dead ending a spool valve ?
In some respects yes, dad run nh tm’s and they run hot at the back end. The Massey was smoking at one point of the oil and dust on the top, it was very very hot. I’m gonna have a look round it tomorrow and see what I can come up withi suppose its the question how hot is it really is it normal ?
Would you be able to take a photo of your backend dipstick? Mine doesn't seem to sit quite right.
Pulled out if possible mine is sitting loose on top I've tied it in place at the momentView attachment 979581
was this what your after? Or do you want a picture of the stick pulled out?
Is that not 1 of them dipsticks that has a big rubber bung on the bottom side that of u turn the handle it makes it expand creating a nice tight fit?Pulled out if possible mine is sitting loose on top I've tied it in place at the moment
It is. Same as my MF, but the rubber is getting too soft now. Sometimes the nut underneath can come loose from the big washer below it, so it all spins around.Is that not 1 of them dipsticks that has a big rubber bung on the bottom side that of u turn the handle it makes it expand creating a nice tight fit?
A new rubber bung would be the answerIt is. Same as my MF, but the rubber is getting too soft now. Sometimes the nut underneath can come loose from the big washer below it, so it all spins around.