Massey Ferguson 3635 Project

masseybreaker

Member
Location
wakefield
this is where the fun begins it could be loosing oil pressure through the pto pack try the same sequence as in the video while turning the steering wheel see if its the same or only the pto does it
 

SuperTwo

Member
The problem only arises after getting up to working temperature. Steering is ok without pto engaged and marginally stiffer with the pto engaged when in A or B Dynashift.
Is this a combination of a few small leaks? Am I correct in the thinking that steering will always get priority flow? When in D Dynashift it's purely mechanical drive and that's why pressure isn't dropping when the PTO is engaged?
 

ste stuart

Member
Location
bolton
I’m thinking of getting rid on my 3655 if anyone’s interested, I seem to be spending more and more time on a tractor so I’d like something a bit quieter preferably with suspension
 

SuperTwo

Member
Working on a 3645 at the moment that's stuck in 4wd. The button is working correctly, brakes lights are fine and the speed sensor is working too but I'm still not getting power to the solenoid when the tractor starts rolling. Is there anything else to check or do I have a fault in the autotronic box?
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 77 43.0%
  • Up to 25%

    Votes: 62 34.6%
  • 25-50%

    Votes: 30 16.8%
  • 50-75%

    Votes: 3 1.7%
  • 75-100%

    Votes: 3 1.7%
  • 100% I’ve had enough of farming!

    Votes: 4 2.2%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,286
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top