Massey ferguson 4365 lights HELP!!

Bedders

Member
Hi guys got these lights any clue? Thanks
20200605_161915(0).jpg
 

Monty

Member
The oil droplet in a gear one is transmission oil pressure warning light and the 2 gears light is power shuttle error code which comes on at the same time. If they come on after starting and quickly go out don't worry about it. If they stay on I think the tractor needs a service
 

mixed breed

Member
Mixed Farmer
Does the "two gear" light flash? If so count how many times.

Should run a series of flashes a pause then another series of flashes.

Crack the code and let me know I may be able to help
 

Bedders

Member
The oil droplet in a gear one is transmission oil pressure warning light and the 2 gears light is power shuttle error code which comes on at the same time. If they come on after starting and quickly go out don't worry about it. If they stay on I think the tractor needs a service
Tractor just had service.from local dealer 2 months ago? You think they didnt do something
 

Monty

Member
If the back end oil and strainers/filters have been cleaned and changed then everything should be ok. Perhaps they knocked the sensor while servicing?

Those 2 lights occasionally come on in our 4270 for no apparent reason but don't stay on for very long so I just ignore them. If the light in the bottom left corner comes on (gear wheel with a line through) then you need to stop the engine otherwise it could cause damage
 

Bedders

Member
Maybe yeah might be an option will keep an eye on that one!! They said its been all serviced
If the back end oil and strainers/filters have been cleaned and changed then everything should be ok. Perhaps they knocked the sensor while servicing?

Those 2 lights occasionally come on in our 4270 for no apparent reason but don't stay on for very long so I just ignore them. If the light in the bottom left corner comes on (gear wheel with a line through) then you need to stop the engine otherwise it could cause damage
Yeah
 

Bedders

Member
Does anyone know how to boost the hydraulic pressure we have a nc dump trailer with a palfinger crane it lifts timber but no where near what it should the little avant lifts the same??
 

Wombat

Member
BASIS
Location
East yorks
The steering pump provides the low pressure oil for the gearbox services, 4wd, pto, diff lock etc so if the steering is locking then releasing I would be concerned the oil is getting to these services and you don’t want the power shuttle on one of those to run dry
 

Bedders

Member
The steering pump provides the low pressure oil for the gearbox services, 4wd, pto, diff lock etc so if the steering is locking then releasing I would be concerned the oil is getting to these services and you don’t want the power shuttle on one of those to run dry
We topped up the hydraulic oil and it seems to be ok now however still have the lights? Any used tractor i would of thought it would have 3 months warranty?
 

mixed breed

Member
Mixed Farmer
Does anyone know how to boost the hydraulic pressure we have a nc dump trailer with a palfinger crane it lifts timber but no where near what it should the little avant lifts the same??

You can combine the spool valve oil flow with the lift arm flow to give you super fast twin oil flow. The lever is at the rear of the right hand console, next the the 1000/540 selector

Back to your earlier post, I've found the book at last, here is the code list
IMG_20200606_023900.jpg

4-2 sounds likely, if it's been run short of oil and lacks hydraulic flow as you indicate, it may well be the auxiliary tandem hydraulic pump (opperates both steering and spool valves) is on the way out.. possibly covered by warranty??
 

Big_Alan

Member
I have a 4345 and I had the same lights on. Originally changed the pressure switches and sorted it temporarily but the problem came back. Basically losing drive and wouldn’t move. It turned out to be the ecu in the tractor which controls the forward and back. Something like £800 for a new one and then has to be programmed after that. Hope that helps.
 
Location
Suffolk
I have a 4345 and I had the same lights on. Originally changed the pressure switches and sorted it temporarily but the problem came back. Basically losing drive and wouldn’t move. It turned out to be the ecu in the tractor which controls the forward and back. Something like £800 for a new one and then has to be programmed after that. Hope that helps.
FFS! Who'd want a machine which did this even occasionally? POS to put it mildly.
SS
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 79 42.9%
  • Up to 25%

    Votes: 63 34.2%
  • 25-50%

    Votes: 30 16.3%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 6 3.3%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,287
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top