Massey Ferguson 6480 pto won’t start

[3cpowertrain]

Got a Massey 6480 and the pto won’t start also got these codes on the dash.. can anyone advise what the codes are

 

[dee]

The TC and DC is the software levels.
Does the PTO light flash but not engage or the light not coming on at all

 

[Farmer_Joe]

Mine used to stop randomly the emergency stop button had failed

 

[3cpowertrain]

The TC and DC is the software levels.
Does the PTO light flash but not engage or the light not coming on at all

Hi yes the light flashes but it won’t engage

 

[dee]

It's most likely the round on off button to be at fault.
Try engaging the PTO using the yellow external button to see if it works.

 

[3cpowertrain]

Hi Done some tests again this morning and it appears to work when the shaft to the machine is off but as soon as you put the shaft on. It doesn’t turn but the pto speed is reading the dash.. so thing pack or control valve fault

 

[daveydiesel1]

Hi Done some tests again this morning and it appears to work when the shaft to the machine is off but as soon as you put the shaft on. It doesn’t turn but the pto speed is reading the dash.. so thing pack or control valve fault

U sure it not just in neutral?

 

[3cpowertrain]

It all appears To be switching from 1000 to 540.. nothing feels loose unless it’s come apart on the selector