- Location
- Ballyclare Northern Ireland
How do I access the hidden menu on mf 7600 with the pad beside the indicator stalk? Used to know but can't remember. Can you cancel error codes here?
Massey hidden menu.
- Thread starter shumungus
- Start date
- Location
- South wales
Hold down or up can’t remember which
davidroberts30
Member
- Location
- pembrokeshire
Its hold up on the 7400
Speedstar
Member
- Location
- Scottish Borders
Best way is to replace it with one of these
- Location
- Ballyclare Northern Ireland
As helpful as ever.
Hesston4860s
Member
- Location
- Nr Lincoln
He’s right tho !.
- Location
- South wales
Which error codes are you getting
Tarw Coch
Member
- Location
- Bottom of Wats Dyke
How old is that?Best way is to replace it with one of these
A Massey of similar vintage would be just as good wouldn’t it?
- Location
- Ballyclare Northern Ireland
E4363
Coming up in the book as DOC outlet temp sensor.
Dicked about on and off all day but has now went to limp mode. MF service will be here in the morning but hadn't planned on stopping long tonight as weather to break tomorrow pm. Was wondering was there a bodge to get her going.
- Location
- South wales
Annoying
Speedstar
Member
- Location
- Scottish Borders
it is the best help you can get , No add blue problems like what you have or a £800 bill to get it going again .
- Location
- Ballyclare Northern Ireland
True about the adblue, but a picture of a JD is about as much use to me at the moment as a chocolate teapot.
Speedstar
Member
- Location
- Scottish Borders
it is problem you can not fix with out a laptop, if you need to get on you would have been better calling the dealer than putting some thing on TFF
TripleSix
Member
- Location
- Helmsley, North Yorkshire
Catalyst sensor fault.
I doubt you'd gain anything by unplugging the sensor either
I doubt you'd gain anything by unplugging the sensor either
- Location
- South wales
That’s as maybe but no harm in asking is there and as he has already said they are coming out to look at it
gone
Member
- Location
- Carlow Ireland
Fine machine, pity they went so far south from there, sad that JD don't even try to make anything even remotely as good as it anymore.Best way is to replace it with one of these
- Location
- Sorn Ayrshire
Check plug where the cable comes down from the exhaust their fair good chance its soaking wet dry it out and cut a drain at the lowest point sorted mine .
- Location
- Ballyclare Northern Ireland
Was speaking to head mechanic a number of times today and he and his team were under pressure to say the least and since we are at muck and slurry I didn't push it as to me someone's grass and grain are more important in the dry than what we are at. I try not to cry wolf if I can. The tractor is in limp mode, they know this so it has now become more of a priority so you don't need to worry someone will ge along in the morning to sort it. Hopefully.
- Location
- Ballyclare Northern Ireland
And to add in the past I have found TFF members to be very helpful. Well, most of them..............
Speedstar
Member
- Location
- Scottish Borders
that is a very common problem from the early 7600's , that still has not got a factory fix yet, you never know when the new range comes out later in the year they may have sorted it out
The London Palladium event “BPR Seminar”
This is our next step following the London rally 
BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth
Join us @LondonPalladium on the 16th for beginning of UK business fight back
lwtheatres.co.uk
BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth
Join us @LondonPalladium on the 16th for beginning of UK business fight back
BPR Summit | LW Theatres
lwtheatres.co.uk