Massey Quick Release Couplers

[MasseyMad7618]

Hi all needing to purchase a couple of quick release couplers for our 6480 to cure an oil leak I see the AGCO ones are rather expensive and was looking at other options. Sparex ones seem about £100 cheaper but don’t seem to be in stock anywhere and QTP ones are cheaper again, anyone any experience with the QTP ones? Do they last a reasonable length of time?
Cheers

 

[daveydiesel1]

Why not just fit the cheap 1s with the slideing outside part, i like them as they dont leak or spit the pipes out

 

[Mur Huwcun]

Why not just fit the cheap 1s with the slideing outside part, i like them as they dont leak or spit the pipes out

You would usually just need a BSP to JIC male male to fit them but on a lot of tractors they’re threaded straight into the cast valve block, at least with push pulls if something goes wrong the pipe pops out rather than stripping the cast block thread or removing a chunck out of it…

 

[Nearly]

@masseybreaker

 

[masseybreaker]

dont use the cheap lock on type they can be very expensive if you loose the machine of the back and it takes the spoolblock with it
i think they are all the same its a very odd thread they use there wont be that many places they are made . and at the end of the day half price last half as long

 

[DrDunc]

Agco part number VAV37203600 fitted my valtra when I added additional spools at the back

£42 each from local Massey/valtra dealer

 

[Munkul]

Had a couple of these:

S.3049 Hydraulic QR Rigid Mounted Break-Away Coupling 1/2" Bsp Female | for Landini, MF | UK Supplier

Product Specification and Information for S.3049 Hydraulic QR Rigid Mounted Break-Away Coupling 1/2" Bsp Female | for Landini, MF

www.malpasonline.co.uk

seem to work just fine.

 

[Monty]

Release Under Pressure Breakaway

A Range of ISO A Breakaway Couplers to Include :- Bsp female , Metric Bulkhead and JIC Bulkhead to suit Standard 1/2" ISO Probes.

www.parquiponline.com

These seem to be ok. Bought a couple from here a while ago but they don't seem to stock the M22 size that fit ours now

 

[Universe]

These any good? Or too cheap...

Quick Release Break-Away Coupling 1/2″ Female – M22 x 1.5 – SDTS Engineering Ltd

www.sdtsengineering.co.uk

 

[Pigless]

Hi all needing to purchase a couple of quick release couplers for our 6480 to cure an oil leak I see the AGCO ones are rather expensive and was looking at other options. Sparex ones seem about £100 cheaper but don’t seem to be in stock anywhere and QTP ones are cheaper again, anyone any experience with the QTP ones? Do they last a reasonable length of time?
Cheers

I've put some faster FM quick release couplers on, fitted straight on after taking the leak off pipes etc off. Seem great easy to use and no leaks and breakaway safety. £55 each. Tried the QTP ones and they lasted a year but leaked.