McConnel gearbox help!

mf298

Member
I have an old McConnel PA44 with Flail form about 1980. The bearings in the gearbox that drives the pump have died. When I measure them they appear to match metric sizes. Outside diameter 90mm, inside 50mm and 20mm wide. As the rest of the parts are all imperial is it likely that the bearings would be metric?
Anybody out there got any thoughts or comments please?? TIA
 

bobk

Member
Location
stafford
I have an old McConnel PA44 with Flail form about 1980. The bearings in the gearbox that drives the pump have died. When I measure them they appear to match metric sizes. Outside diameter 90mm, inside 50mm and 20mm wide. As the rest of the parts are all imperial is it likely that the bearings would be metric?
Anybody out there got any thoughts or comments please?? TIA
This it

http://simplybearings.co.uk/shop/p241/FAG 6210 Open Type Deep Groove Ball Bearing 50x90x20mm/product_info.html
http://simplybearings.co.uk/shop/p1536/FAG 62102Z Metal Shielded Deep Groove Ball Bearing 50x90x20mm/product_info.html

cheaper

http://www.ebay.co.uk/itm/6210-2RS-Sealed-Ball-Bearing-62102RS-50-x-90-x-20mm-/320438996463?pt=LH_DefaultDomain_3&hash=item4a9ba70def
 

Kevtherev

Member
Location
Welshpool Powys
You can get a complete alloy gearbox off flow fit hydraulics.
Did bearings on old Hy reach once and not much good as the alloy housings had worn and the bearings turned.
 
You can get a complete alloy gearbox off flow fit hydraulics.
Did bearings on old Hy reach once and not much good as the alloy housings had worn and the bearings turned.
I think it's the bearings in the gearbox he needs Kev, the 'box in these should be cast iron housing and the pumps either alloy or iron housing, Pavesi or Comer boxes usually.
 

mf298

Member
Thanks to all!
It is the gearbox bearings I need and the housing is alloy. I had the found the ones on Simply Bearings site, was not convinced that bearings would be metric and rest of fittings imperial - down to UNF nuts and bolts to hold it together! I hear what is said about bearings turning in housing but will use bearing tite and take a chance as machine does not do much work.
 

Forum statistics

Threads
162,874
Messages
3,719,672
Members
40,994
Latest member
FarmerJohn67

China pig recovery drives Genus growth

  • 210
  • 0


Written by Jamie Day

A trading update from animal genetics business Genus says trading in the first four months of the current year, to October 31st 2019, has seen volumes, revenues and adjusted profit grow across its PIC and ABS pig and cattle divisions. The global pig business is benefitting from rising pigmeat prices in China, following the African […]

The post...
Top