McConnell topper

jondear

Member
Location
Devon
When using my McConnell 9 today the blades started to hit . Something in drive shafts or gearbox .
Taken off covers there is more movement on one side short shaft with rubber drive bushes as grub screw is missing .Any ideas ?I need to take off rubber drive to check splines going in I suppose.
 

Stock

Member
Splines are gone on the donut drive adapter so if you can replace them with this type.................................
s-l1600.jpg


this type have a more positive fixing in comparison to the grub screw type ..........................................................................
 

NI agri-food stakeholder groups discuss climate change bill with committee

  • 33
  • 0
Written by Richard Halleron from Agriland

The Livestock and Meat Commission (LMC) recently submitted oral evidence to members of the Stormont Agriculture, Environment and Rural Affairs (AERA) committee on the content and potential impact of the Northern Ireland Climate Change Bill (No.2).

This draft legislation was recently introduced to the Northern Ireland Assembly by the Department of Agriculture, Environment and Rural Affairs (DAERA) in conjunction with agriculture minister, Edwin Poots.

“We were accompanied by representatives from a wide range of food industry bodies, including the Northern Ireland Meat Exporters’ Association,the Ulster Farmers’ Union [UFU], Northern...
Top