Mchale bale wrapper 991lber

[forblue]

never used this before, normal operator not here anymore, owner tried it today operates ok but after wrapping finished he has to press auto start again to tip it off table which is what it states in manual but owner thinks it should do it all automatic is he right and how do we get it to do so...

 

[KB6930]

When you switch the box on you need to press the enter arrow to select continuous cycle to get it to auto tip .

Or press the down arrow till you get to operator settings then switch on continuous cycle

 

[forblue]

Thank's will try tomorrow..

 

[Greythundercloudys]

Iv an older conor auto wrapper, had it restored and you have to press the start button again to tip bale off, l thought that was a safety think, but could l cancel that buy doin the same thing.

 

[Zebbedee]

Iv an older conor auto wrapper, had it restored and you have to press the start button again to tip bale off, l thought that was a safety think, but could l cancel that buy doin the same thing.

I am pretty sure on the Conor wrapper the recognised method of auto tip is to tie the switch on control box up with an elastic band

 

[Greythundercloudys]

What switch will that be?

 

[Zebbedee]

I had a mchale but my mate had a Connor and that’s was what he was to,d to do all I remember was it was a black flick switch on control box yours may be different that’s all I know I,m afraid

 

[Greythundercloudys]

Yes that's Wright, black switches.

 

[forblue]

Just to let people know i tried entering continuous cycle but no joy so went to different programme made matter's worse to the extent after 2 revolutions the table reversed itself, so tried another one success...

 

[womble8350]

Which box do you have? The early one with a row of toggle switches?.

 

[Greythundercloudys]

Yes that older type

 

[womble8350]

As @Zebbedee says tie the tip switch in the up position. When you either press start or use the remote it will do its wrap cycle then press again it will do its tip cycle. This is on the older Mchale boxes anyway.

 

[Greythundercloudys]

The way it works with me is press remote it does the wrap cycle then stops, press start again on remote it tips it of.

 

[womble8350]

Yes that’s as good as you will get on the old boxes