Hi all, am going to look at a fusion 2 and wanted to know what too look out for on them. What do people think of them from user experience? Good and bad! Tia
Get to know the control box well , a camera on the wrapping table is a godsend. Did some hay first just to get to know the baler the next day wrapped haylage pretty simple when you get to know it. Obviously a lot of chains and bearings that need lubrication and if they haven’t wear pretty quickly. Mine was bought sh and had done 42 k bales and touch wood been trouble free great machine
I haven’t really pushed it as I prefer to make a good solid bale slowly, l think it’s 4 ft 6 but not sure the auto net is activated when the bale gets to a certain size and the buzzer goes of in the cab to stop but can drive on for another five or so seconds until you see the net going into the chamber so making the bale bigger
Hi all, am going to look at a fusion 2 and wanted to know what too look out for on them. What do people think of them from user experience? Good and bad! Tia
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.