Merlo P32.6 plus (2013) cab work light problem

[Sonoftheheir]

Morning all,

The cab top lights front and rear have stopped working on our Merlo. The fuses are ok and you can hear something clicking on the board behind the seat when you press the two switches.

I was looking at the rear ones and they flashed on and off quickly once.

So I assume the bulbs are ok.

I think the front set stopped working before the back.

Any help appreciated!

Gary

 

[Sonoftheheir]

Edit -

The back ones are working now? I haven’t done anything apart from keep flicking the switch on and off?

 

[T C]

Cab mounts wear causing the cab to crush the wiring. Not sure that should bother the lights but check the cab to chassis clearance.
The other issue is poor earth connections, there is one behind the instruments that can come loose.

 

[Sonoftheheir]

Thanks @T C

The bulbs have gone on the front

 

[Planttech]

Thanks @T C

The bulbs have gone on the front

Hi if rear are flashing on and off possibly a connection issue on the circuit board. I would advise sorting before to much damage. I usually wire in relays to remove the high load that the plugs have to deal with