MF 20 Speedo on dash not working

[Jonny J]

Hi guys
I have a yellow industrial MF20. It has a rpm clock and a road speed clock on dash. The road speed clock is not working and i have it diagnosed to the cable drive gear on the side of gearbox where the cable screws onto it. I removed it and It seems to be slipping when manually turning with hand. Im just wondering if anyone knows where to get one or if it can be repaired
Many thanks

 

[agrimax]

http://www.speedograph-richfield.com/html/classic_tractor_spares.html

They might be able to help............

 

[crofter 65]

Speedograph do a replacement angle drive, doesn't look quite like the original going by their website but I suppose if it works that may be ok,
I was planning to get one for my own MF20.

 

[Jonny J]

Thanks. Will check them out

 

[Redbar]

Speedograph do a replacement angle drive, doesn't look quite like the original going by their website but I suppose if it works that may be ok,
I was planning to get one for my own MF20.

Hi,
Just wondering if you managed to source a suitable angle drive unit? I have a MF20 but with missing speedo, cable and angle drive. Please could you confirm where exactly the drive take off is on the transmission casing? I think mine may have been capped off and is situated below the handbrake linkage on the left hand side just behind the gearbox bell housing.

Regards
R

 

[crofter 65]

Hi,
Just wondering if you managed to source a suitable angle drive unit? I have a MF20 but with missing speedo, cable and angle drive. Please could you confirm where exactly the drive take off is on the transmission casing? I think mine may have been capped off and is situated below the handbrake linkage on the left hand side just behind the gearbox bell housing.

Regards
R

The angle drive fits in the round cover where the PTO lever is, I repaired my angle drive but it's stopped working again so I may have another look at speeograph ones.

 

[Redbar]

Thanks for your prompt reply. Is it the elliptical cover you refer to below and slightly forward of pto lever housing?
I will attach photo.
Ps there is yellow paint under the grey paint!
Thanks

 

[Redbar]

Photo re above post.

 

[crofter 65]

Here’s a picture of mine.

 

[Redbar]

Ah....I understand now. Thanks very much for taking the time for the photo.
I will investigate further.