- Location
- East Tyrone
Trying to take a Stanadyne injector pump off our MF3645. I've taken the front plat off and removed the 22m nut and spring washer. Should the gear now simple pull off with a couple 8mm bolts in the threaded holes?
MF 3645 injector pump
- Thread starter flatliner
- Start date
ACEngineering
Member
- Location
- Oxon
Dont assume the gear is keyed to the shaft. Perkins engines certainly aren't on the later 1000 series and 1100 series. You set and lock engine on top dead centre then lock the injector pump before removing.
Your proberly not on a perkins though?
- Location
- Welshpool Powys
Just on a taper I think
- Location
- East Tyrone
Yeah, the shaft is keyed.
ACEngineering
Member
- Location
- Oxon
shafts have the keyway on the perkins but they don't have a key and the gear does not have a keyway just rely on the taper.
one to be aware of on the perkins engines
- Location
- East Tyrone
"shafts have the keyway on the perkins but they don't have a key and the gear does not have a keyway just rely on the taper.
one to be aware of on the perkins engines "
Nothing's ever simple.
Just checked, it is a Perkins engine, but there no keyway on the shaft ,but there is a keyway in the gear.
one to be aware of on the perkins engines "
Nothing's ever simple.
Just checked, it is a Perkins engine, but there no keyway on the shaft ,but there is a keyway in the gear.
ACEngineering
Member
- Location
- Oxon
"shafts have the keyway on the perkins but they don't have a key and the gear does not have a keyway just rely on the taper.
one to be aware of on the perkins engines "
Nothing's ever simple.
Just checked, it is a Perkins engine, but there no keyway on the shaft ,but there is a keyway in the gear.
i'm used to the Delphi injector pumps, so there will be a few differences.