MF 6400 headlight replacement

[Rob Holmes]

Due to how crap these are I'm looking to replace them with LED alternatives, has anyone done this?
What spec lights to get?
Any links?

 

[Dave6170]

Try utv products

 

[RhysT]

Due to how crap these are I'm looking to replace them with LED alternatives, has anyone done this?
What spec lights to get?
Any links?

I believe @UTV Products have these in development??

 

[Chae1]

@Farma Parma

 

[davidroberts30]

Next time I have a spare hour I'm going to run 16amp twin core from the battery and use relays so the lamps get full power

 

[UTV Products]

Thanks for the mention everybody. We are working on this with a view to becoming road legal in the process but a slower progress than hoped.
This image attached is indicative of another NEW M/F led upgrade due out in weeks not months...… To suit all front bonnet positions for that light be it work light or one of the headlight beams.

Apologies not ready with an led headlight on 6400 series though. @Farma Parma

 

[Rob Holmes]

When do you anticipate the 6400 headlights will be ready?

 

[Farma Parma]

Next time I have a spare hour I'm going to run 16amp twin core from the battery and use relays so the lamps get full power

Done all of that & sep additional relays also so the £140 switch to flick between main & dip beam doesn't fail yet again.
had three of them on the 6480.
Then added the brightest standard bulbs i could find.
There ok but when you put the Nordic LED worklights on it kinda wipes them out.

Yes there is aftermarket LED units now widely available but none are LEGAL to use.

If you ever cause an accident on the like of a main A road you will regret fitting anything that isnt type approved.
also most likely in-validating your insurance.

 

[UTV Products]

When do you anticipate the 6400 headlights will be ready?

I will ask the factory tomorrow and hope for a time scale.

 

[Farma Parma]

Thanks for the mention everybody. We are working on this with a view to becoming road legal in the process but a slower progress than hoped.
This image attached is indicative of another NEW M/F led upgrade due out in weeks not months...… To suit all front bonnet positions for that light be it work light or one of the headlight beams.

Apologies not ready with an led headlight on 6400 series though. @Farma Parma

you will get there Martin! i might be in the market for these round worklights for my next tractor... i'll watch how this develops with interest

 

[SMID]

That looks promising @UTV Products I,d be keen to try them as well.

 

[UTV Products]

Thanks FP. This for Massey and same timescale for later Fendt too. Weeks not months away.

 

[UTV Products]

That looks promising @UTV Products I,d be keen to try them as well.

Thank you. Will let you have some of the first available to evaluate. Regards Martin

 

[Lofty1984]

Thank you. Will let you have some of the first available to evaluate. Regards Martin

Keep us posted here please I’d been keen on some

 

[Will Blackburn]

Due to how crap these are I'm looking to replace them with LED alternatives, has anyone done this?
What spec lights to get?
Any links?

I bought some off eBay, fitted no mither, much better.

 

[davidroberts30]

I bought some off eBay, fitted no mither, much better.

Headlights or worklamps?

 

[Will Blackburn]

Headlamps, the worklamps are ok.

 

[UTV Products]

Keep us posted here please I’d been keen on some

 

[davidroberts30]

Headlamps, the worklamps are ok.

For the 6400?linky?

 

[Will Blackburn]

It’s a T2 so not very exciting. It’s a while since they were purchased so I’d need to trawl my purchase history.