mf and greenland balers

As said usually those concentric bearings are relatively easy to change as they're not right a tight fit on the shaft like some other bearings.
Two grub screws and knock the shite out of the collar with a taper punch and it'll come loose the plenty of p!ss in the shaft, perhaps a rub over with emery cloth and hay presto bobs your uncle it'll come off.
Dutch auction on the repair robbie ,think we both should go do it ,and get strawbs in a bikini , would pay for that 😘
 

robbie

Member
BASIS
In the words of Harold steptoe "you dirty ole man" anyway by the time you've struggled to get that bearing off you'll be too knackered to chase any fine young fillies around the yard!!!
Edit.@Will 1594 you'll have to step aside and let a pro have a crack at it.....the chasing around the yard not the bearing, your welcome to that!!!!!
😁😁😁😁😁😁😁
Dutch auction on the repair robbie ,think we both should go do it ,and get strawbs in a bikini , would pay for that 😘
 
Last edited:

spin cycle

Member
Location
north norfolk
actually my rp150 needs a coupla 'other' little jobs while i think about it :whistle: ....pick up reel had a 'running repair' about 5 bales before it caught fire and i've taken a 'coupla' bits off whilst investigating the bearing but i'm pretty sure i could find most of them:whistle:
 

robbie

Member
BASIS
actually my rp150 needs a coupla 'other' little jobs while i think about it :whistle: ....pick up reel had a 'running repair' about 5 bales before it caught fire and i've taken a 'coupla' bits off whilst investigating the bearing but i'm pretty sure i could find most of them:whistle:
The mind boggles as to who @Will 1594 will want to see in a bikini after putting that lot right!😯🤔
 

spin cycle

Member
Location
north norfolk
He sss as I’d he is giving me the Baler if I repair it , 🤦‍♂️🤦‍♂️🤦‍♂️🤦‍♂️🤷‍♂️🤷‍♂️🤷‍♂️🤷‍♂️ Then he can borrow it back 😳
Don’t really know how that works

no no....i offered you a half share if you repair it :rolleyes: ....blimey yorkshiremen:rolleyes:....gotta watch em😁

edit..in the spirit of 'full disclosure' the bale density needle fell off the gauge many years ago....i just drove it til she sounded like she was going shake herself to bits then stopped to tie :whistle:
 
Last edited:

SFI - What % were you taking out of production?

  • 0 %

    Votes: 77 43.5%
  • Up to 25%

    Votes: 62 35.0%
  • 25-50%

    Votes: 28 15.8%
  • 50-75%

    Votes: 3 1.7%
  • 75-100%

    Votes: 3 1.7%
  • 100% I’ve had enough of farming!

    Votes: 4 2.3%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,286
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top