Mf Combines

[rob h]

Just a thought but easily over looked have you checked the concave to make shure its not partly blocked between the wires

 

[Phil12]

Can anyone help I need the numbers off the chopper belts on a Massey Ferguson 30 combine. I have the part numbers but need the numbers on the belts. Part numbers are D41942200 and D41978400. Thanks Phil

 

[8100]

Someone has to do this reply.But i am using a different brand to avoid the @Thick Farmer copyright

 

[Adeptandy]

Wind sounds low compared to some other makes. Have you a chaff spreader? ie are you certain whether it’s sieve or walker losses?

Yes, chaff spreader

 

[Adeptandy]

The one in question is dronninborg designed and built. Same essentially as the previous 30 40 series.
Just new tinwork really.

This is a Dronninborg build

 

[Adeptandy]

Someone has to do this reply.But i am using a different brand to avoid the @Thick Farmer copyright
View attachment 827602

Have been tempted

 

[Badshot]

Can anyone help I need the numbers off the chopper belts on a Massey Ferguson 30 combine. I have the part numbers but need the numbers on the belts. Part numbers are D41942200 and D41978400. Thanks Phil

Genuine only have the part numbers.
They're embedded into them.

 

[Campbell]

From my AGCO days, and as mentioned, removing some concave wires was a good fix for this problem on Dronny machines. But as you well know, conditions always vary with variety, season and weather....

 

[Badshot]

thanks, I was unaware, was this built in Italy?

Dronninborg are Denmark.
It was the next range, betas etc that were laverda

 

[Adeptandy]

this is a MF 7274 Cerea

 

[Phil12]

Genuine only have the part numbers.
They're embedded into them.

Thanks for the reply. Was hoping someone might have non genuine ones on and be able to get the numbers for me

 

[rob h]

Tryed that years ago local belt supply cross ref numbers and got us some belts half price .they didn't last verry long .standard v belts are not as tough as combine belts.unless you can find some heavy duty ones

 

[Badshot]

Thanks for the reply. Was hoping someone might have non genuine ones on and be able to get the numbers for me

Kramp do non genuine.

 

[David.]

If it's any comfort, somebody local persevered with a MF 72** for a couple of seasons; they are back to a JD now...

 

[Adeptandy]

If it's any comfort, somebody local persevered with a MF 72** for a couple of seasons; they are back to a JD now...

It may be its last year here ?

 

[Adeptandy]

Not MF but applicable all the same

Printed off and in the combine, thanks

 

[Rust]

opened it up to 7 to ease the straw flow as it was smashing, it was worse on 5 as per book

I don't appear to have a N and no recommendations on the data screen, all out of the book for settings - 04 plate machine

Main menu
Operator manual
Harvest settings
Suggested settings
Pick a crop
Pick a moisture
Hay presto

 

[Rust]

Drove a 40rs years ago that had the same problem. It came down to the concave not being level on both sides. Somewhere in the book it said you should set the concave to a certain number and check there is an 8mm clearance between it and the drum. You can adjust the concave to level it up. Solved the problem for me. Before that it was shovelling grain out the back.

Pull metal tab and measure with gauges

 

[Cowcorn]

Pull metal tab and measure with gauges View attachment 827885View attachment 827886View attachment 827888

Thank you Rust you have solved one of the great mysteries off the world !!
Back in 2012 when we got our 29xp the toolbox that came with it had a set of those tabs now i know what the are for !!

 

[Adeptandy]

I'll be using an Allen key