Mf Front dual control question

Bumble Bee

Member
Arable Farmer
Hi
It's my first time using the front dual control on our MF 7495. I have managed to set the delay between lowering the front linkage and then the rear linkage. But no matter how I set it I cannot manage to get a delay between lifting the front linkage and the rear linkage.
As soon as I hit the lift switch, both linkages lift at about the same time.

Can anybody point out where I'm going wrong.
TIA
Bumble Bee
 

Tractor Boy

Member
Location
Suffolk
Do you not set it all up in headland management on the data tronic screen. I haven’t done it for ages but presume you start the sequence with lift front, then either a time or distance delay, then lift back, then do you put a pause in the sequence until you press hms again which the first command is drop front then time or distance delay then drop rear linkage.
of course you can put any other commands of revs, gears etc into the sequence where you want to.
I’m assuming you have a datatronic screen to set it all up as I don’t know how you’d do it if not.
 

Bumble Bee

Member
Arable Farmer
Do you not set it all up in headland management on the data tronic screen. I haven’t done it for ages but presume you start the sequence with lift front, then either a time or distance delay, then lift back, then do you put a pause in the sequence until you press hms again which the first command is drop front then time or distance delay then drop rear linkage.
of course you can put any other commands of revs, gears etc into the sequence where you want to.
I’m assuming you have a datatronic screen to set it all up as I don’t know how you’d do it if not.
We have the datatronic screen. It has a dual control function that is supposed to control both linkages by just using the rear lift switch. All set through the screen. Don't know if I'm missing something though.
 

Tractor Boy

Member
Location
Suffolk
We have the datatronic screen. It has a dual control function that is supposed to control both linkages by just using the rear lift switch. All set through the screen. Don't know if I'm missing something though.
Sorry. I haven’t set anything up on dual control or headland management for a long while and can’t remember.
 
Tags
mower

SFI - What % were you taking out of production?

  • 0 %

    Votes: 80 42.3%
  • Up to 25%

    Votes: 66 34.9%
  • 25-50%

    Votes: 30 15.9%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 7 3.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,293
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top