Mf T bar pick up hitch

[multi power]

Can anyone tell me what T bar I need for a 35 , I see some on eBay and they are not all the same
Thanks

 

[Henarar]

got a link ?
35 and 65 ones were different
got one here I think

 

[multi power]

I don't know how to link from phone but some on eBay, some listed as 35, some t20 and one 165 I think, the one for 165 looks like it might be longer?

 

[Henarar]

65/165 one is longer and more heavy built if I remember right
I can't remember if there is a difference between a T20 one and 35 one though

are you wanting it for a pick up hitch or just to hang a weight on/hold the arms up ?

 

[multi power]

I'm wanting to use hitch on 35, I already have the hook bit so may as well be able to use it

 

[SMID]

Te ones locked with a spring loaded "dog" which you pushed down with a spring loaded plunger 35 ones have the pin type . The early ones wore the dog then jumped out amazing the distance a Fergi trailer could go sliding on the skid

 

[multi power]

Te ones locked with a spring loaded "dog" which you pushed down with a spring loaded plunger 35 ones have the pin type . The early ones wore the dog then jumped out amazing the distance a Fergi trailer could go sliding on the skid

That makes sense, the one dad used to have on the 35 had round pin
I remember him selling it for £30 I think

 

[multi power]

I got one today, t20 type I think, but it should do my job, best of all it wasn't far away

 

[Forever Fendt]

I got one today, t20 type I think, but it should do my job, best of all it wasn't far away

Only just noticed this, i have some t bars , flat bars and 9 hole bars and a belt pulley all doing nothing

 

[multi power]

Only just noticed this, i have some t bars , flat bars and 9 hole bars and a belt pulley all doing nothing

Ffs you should have said last week

 

[Forever Fendt]

Ffs you should have said last week

only just noticed sorry ,was going to get the mrs to put them on ebay

 

[FE35]

Te ones have a button in to release later ones have a lever

 

[tomlad]

Mines a alli button like a mushroom on the te 20 0ne

 

[multi power]

Mines a alli button like a mushroom on the te 20 0ne

I bought one like that, but the button bit doest work, I will just put a pin in it

 

[tomlad]

Spring gone inside eh
I tink it has to lift . Retract a bit to be able to depres

 

[multi power]

Spring gone inside eh
I tink it has to lift . Retract a bit to be able to depres

Non existent, it just had a bent bolt stuck in it
I just drilled a hole all the way through and dropped a bolt in
It wasn't dear, or far away and it won't be doing much heavy haulage

 

[tomlad]

Main thing is u need it for external hydraulics aint it

 

[multi power]

Main thing is u need it for external hydraulics aint it

I'm confused? External hydraulics should work off the draught lever ? My 65 will tip a trailer with the draught lever but I can remember dad had to chain the arms down to get a trailer to tip

 

[tomlad]

I meant on the te 20
as the lift piston exits the cylinder , the skirt pushes a lever that knocks the linkage into hold
so it does not lift any higher
BUT that also stops oil to anything else , so no externals , the t bar holds the linkage a bit lower so u can have external oil for ur loader or tipper trailer .
modified system by the mf 35 / mf65 te 20 was very good for its time .

 

[multi power]

I meant on the te 20
as the lift piston exits the cylinder , the skirt pushes a lever that knocks the linkage into hold
so it does not lift any higher
BUT that also stops oil to anything else , so no externals , the t bar holds the linkage a bit lower so u can have external oil for ur loader or tipper trailer .
modified system by the mf 35 / mf65 te 20 was very good for its time .

Yes I realized you were meaning t20 but only after I had already posted