MF65 multi power

Discussion in 'Classic Machinery' started by motrac3a, Jan 7, 2017.

  1. motrac3a

    motrac3a Member

    Location:
    North Yorkshire
    I'm part way through restoring an MF 65. The engine is all done so my attention is now focused on the rear end. I've rebuilt the top cover and replaced the hydraulic pump but I cannot source a replacement anywhere. Any idea's? I wondered about trying to fit an MF 35X type, but not sure whether this is possible ??
     
  2. agrimax

    agrimax Member

    Location:
    Co Down
    Not sure what you mean........You say you have replaced the hyd pump but can't source a replacement......?? Is it the multi power pump you mean?
     
    Pennine Ploughing likes this.
  3. motrac3a

    motrac3a Member

    Location:
    North Yorkshire
    Yes I've replaced the hydraulic pump but the multi power pump, that fits on a bracket on top, is unobtainable it seems.
     
  4. agrimax

    agrimax Member

    Location:
    Co Down
    Have you tried a MF dealer? Just looked on the Agco parts book and it seems to be available........Or at least it doesn't say it isn't..........:)
     
  5. motrac3a

    motrac3a Member

    Location:
    North Yorkshire
    Yes, I've tried our MF dealer, they can't help and no spurious companies make them.
     
  6. multi power

    multi power Member

    Location:
    pembrokeshire
    What make is the pump? There were at least 2 different manufacturers
     
  7. agrimax

    agrimax Member

    Location:
    Co Down
  8. motrac3a

    motrac3a Member

    Location:
    North Yorkshire
    Not sure off the top of my head
     
  9. motrac3a

    motrac3a Member

    Location:
    North Yorkshire
    Thanks, will give him a try
     
  10. Ioan annwyl

    Ioan annwyl Member

    Try White House Products .
     
  11. multi power

    multi power Member

    Location:
    pembrokeshire
    Howford hydraulics
     
  12. agrimax

    agrimax Member

    Location:
    Co Down
    The MF part number is 884535M91. I tried it in Whitehouse's search and no luck......
     
  13. motrac3a

    motrac3a Member

    Location:
    North Yorkshire
    wondered if the old pump would be repairable?? If so I bet it would be at a hefty price
     
  14. Mursal

    Mursal Member

  15. motrac3a

    motrac3a Member

    Location:
    North Yorkshire
    Mursal likes this.
  16. SMID

    SMID Member

    Location:
    Sorn Ayrshire
    He is just a couple of miles from here me, the last time that pump was mentioned he said its a Cessna pump and he, d no joy finding one . To the op ,is the original pump worn out ? mine had no Multi power when it came ,turned out it was the pipe through the top of the gearbox that was slack . Its not a particularly high pressure that they operate at I,d need to check the book 400/500 psi I think .
     
  17. multi power

    multi power Member

    Location:
    pembrokeshire
    230 psi I was told
     
    SMID likes this.
  18. Mursal

    Mursal Member

    Would it be worth a phone call?
     
    multi power likes this.
  19. multi power

    multi power Member

    Location:
    pembrokeshire
    Is there any reason a axuncillury pump off a bigger tractor wouldn't fit ? After all very little changed in the back end from the Fe 35 to the last 4300
     
  20. motrac3a

    motrac3a Member

    Location:
    North Yorkshire
    hopefully I can fit one off a bigger/newer tractor,providing the output will be ok
     

Share This Page